Wyszukano: Bohlender

Numer katalogowy: (BOHLH999-45)

Producent: Bohlender

Opis: Screw caps, made of PP, with handy knurl.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: Bohlender

Opis: Straight fitting made of PP, with two hose connectors for elastic tubing.

Producent: Bohlender

Opis: Valve body made of PP with connection (thread UNF ¼" 28G) suitable for b.safe caps. Lid with aeration opening and Luerlock connector, integrated non-return valve with upstream porous PTFE membrane (1 μm), including clip-on service life indicator.

Producent: Bohlender

Opis: Clear, polycarbonate. Each compartment has one door with snap fit closing and integrated gasket ensuring easy opening and tight closure. Temperature resistant from −35 to +70 °C, suitable for use under normal pressure.

Producent: Bohlender

Opis: Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.

Producent: Bohlender

Opis: Boiling stones, made of PTFE, white, prevent chemical splashes and production of big bubbles when boiling the medium. Grain size: 4 mm. Packed in resealable bag. FDA conformity.

Producent: Bohlender

Opis: GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.

Producent: Bohlender

Opis: Protection sheets made from PTFE or FEP.

Producent: Bohlender

Opis: For use as a table pad, slideway or for insulation.

Producent: Bohlender

Opis: PP screw cap, green, distributor body and tubing connectors made from PP

Producent: Bohlender

Opis: Silicone with PTFE washers.

Producent: Bohlender

Opis: This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on vessels and round flasks with ground joint.

Numer katalogowy: (BOHLS1852-28)

Producent: Bohlender

Opis: Ideal for cutting plastic and rubber tubing with and without textile reinforcement.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: Bohlender

Opis: b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.

Producent: Bohlender

Opis: Screw cap made of PPS for GL 45 thread / PP for GLS 80 thread, free movable insert made of PP with 4 lateral connectors (GL 45) suitable for b.safe Caps GL 45 and 3 centric capillary connectors (UNF ¹/₄"). Version and scope of delivery as per below chart.

Producent: Bohlender

Opis: Made of PFA to close unused connections (thread UNF ¹/₄" 28G) on b.safe caps and b.safe waste caps.