Drukuj

Wyszukano: masterflex+pinch+clamp


6 533  wyniki/ów wyszukiwania

SearchResultCount:"6533"

Sort Results

Widok listy Widok uproszczony (nowość)

Oceń wyniki wyszukiwania

Numer katalogowy: (BOHLR1185-01)
Producent: Bohlender
Opis: Angular piece approx. 90° made of static dissipative PE-EX.
j.m.: 1 * 1 SZT


Numer katalogowy: (METO9994Z)
Producent: Metro International
Opis: Regały i szafki, Post clamps, joins units together for maximum strength, zinc-plated
j.m.: 1 * 1 SZT


Numer katalogowy: (SCTV108294)
Producent: S.C.A.T.
Opis: Grounding cable for ground connection with MC grounding plug, 90° angled with clamp.
j.m.: 1 * 1 SZT

New Product


Numer katalogowy: (PRSI96-509)
Producent: ProSci Inc.
Opis: Low-Density Lipoprotein (LDL) Receptor is also known as LDLR, FH, FHC, LDLCQ2, and is a mosaic protein of ~840 amino acids (after removal of signal peptide) that mediates the endocytosis of cholesterol-rich LDL. It is a cell-surface receptor that recognizes the apoprotein B100 which is embedded in the phospholipid outer layer of LDL particles. The receptor also recognizes the apoE protein found in chylomicron remnants and VLDL remnants (IDL). It belongs to the Low density lipoprotein receptor gene family. LDL receptor complexes are present in clathrin-coated pits (or buds) on the cell surface, which when bound to LDL-cholesterol via adaptin, are pinched off to form clathrin-coated vesicles inside the cell. This allows LDL-cholesterol to be bound and internalized in a process known as endocytosis and prevents the LDL just diffusing around the membrane surface. This occurs in all nucleated cells (not erythrocytes), but mainly in the liver which removes ~70% of LDL from the circulation. Synthesis of receptors in the cell is regulated by the level of free intracellular cholesterol; if it is in excess for the needs of the cell then the transcription of the receptor gene will be inhibited. LDL receptors are translated by ribosomes on the endoplasmic reticulum and are modified by the Golgi apparatus before travelling in vesicles to the cell surface. LDL is directly involved in the development of atherosclerosis, due to accumulation of LDL-cholesterol in the blood. Atherosclerosis is the process responsible for the majority of cardiovascular diseases.
j.m.: 1 * 100 µG


Producent: Lenz Laborglas GmbH & CO.KG
Opis: These alu rings with hooks are for cones and sockets to be used with springs for the safe connection of conical ground joints. No breakage of glass hoods.

Numer katalogowy: (LENZ06800000)
Producent: Lenz Laborglas GmbH & CO.KG
Opis: Support, complete with clamps and connectors, for LF 60
j.m.: 1 * 1 SZT


Numer katalogowy: (241-7510)
Producent: USBECK Laborgeräte
Opis: Foot made of die-cast zinc with flexible 300 mm long three-finger clamp, nickel plated brass.
j.m.: 1 * 1 SZT


Numer katalogowy: (SORV75000505)
Producent: Thermo Fisher Scientific
Opis: Crown clamp, tube, easy-seal, PA, for use in S110-AT6 rotor, Do szlifów: Micro-ultracentrifuge rotors
j.m.: 1 * 1 SZT

New Product


Producent: USBECK Laborgeräte
Opis: Zinc die-cast, nickel plated. For attaching glass beakers, flasks, reaction vessels and other laboratory vessels to support stands.

Producent: Spectrum Laboratories
Opis: Standard closures
PP, autoclavable
Only for regenerated cellulose membranes
Lighter than water, normally used in combination with weighted closures
Choose a closure 4 to 10 mm larger than the flat width of the tubing

Numer katalogowy: (SCTV108270)
Producent: S.C.A.T.
Opis: Dovetail the SymLine® system to suit specific requirements. This product selection includes several useful ancillaries.
j.m.: 1 * 1 SZT


Producent: Freudenberg Medical Europe GmbH
Opis: Silicone, platinum-cured.
Numer katalogowy: (BOHLD915-02)
Producent: Bohlender
Opis: Fitting made of PTFE for transition of Tri-Clamp as per DIN 32 676 to a hose connector.
j.m.: 1 * 1 SZT


Producent: VWR Collection
Opis: Glassware platforms with four clamping bars and rubber mat.

Producent: Brady
Opis: Cleats easily clip onto the bottom of clamp-on breaker lockout devices. Assures positive restraint for breakers with long, sliding switch throws.

Numer katalogowy: (METOASK16S)
Producent: Metro International
Opis: These grounding cables provide an effective method of electrostatic discharge for any Metro Super Erecta unit (stationary or mobile) when used in conjunction with aluminum split sleeves or ESD kit and conductive casters.
j.m.: 1 * 1 SZT


Cena wymaga potwierdzenia u dostawcy
Zapasy tego artykułu są ograniczone, ale możliwe, że jest on dostępny w pobliskim magazynie. Upewnij się, że jesteś zalogowany na stronie, aby móc sprawdzić dostępność zapasów. Jeśli call ciągle się wyświetla i potrzebujesz pomocy, zadzwoń na 58 323 82 00.
Zapasy tego artykułu są ograniczone, ale możliwe, że jest on dostępny w pobliskim magazynie. Upewnij się, że jesteś zalogowany na stronie, aby móc sprawdzić dostępność zapasów. Jeśli call ciągle się wyświetla i potrzebujesz pomocy, zadzwoń na 58 323 82 00.
Ten produkt jest ograniczony w dostępie i można go zamówić tylko przy użyciu zaaprobowanego konta. Jeśli potrzebujesz pomocy, napisz do Działu Prawnego VWR na tomasz.chrobak@pl.vwr.com
Do zakupu tego produktu może być potrzebna dodatkowa dokumentacja. Przedstawiciel VWR skontaktuje się z Tobą w razie potrzeby.
Ten produkt jest zablokowany na stronie internetowej. W celu zamówienia, skontaktuj się z Działem Obsługi Klienta.
Produkt oryginalny został wycofany. Dostępny jest wskazny zamiennik .
Wybrany produkt został wycofany - sprzedaż do wyczerpania zapasów. Dostępne zamienniki można znaleźć poprzez wpisanie powyższego numeru katalogowego VWR w okno wyszukiwarki. Jeśli potrzebujesz dalszej pomocy, prosimy o kontakt z Działem Doradztwa Produktowego pod numerem telefonu 58 3238 220.
289 - 304 of 6 533
no targeter for Bottom