Wyszukano: Pr\u00F3bniki powietrza

Producent: LABCONCO

Opis: Accessory for Freeze Dryer, Heated shelf with sensor, for bulk tray dryers, 323×432×25 mm (suitable for operating at 230 V, 50/60 Hz)

Producent: LABCONCO

Opis: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Producent: LABCONCO

Opis: Glassware washing machines, Cylinder insert graduated

Producent: LABCONCO

Opis: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Producent: LABCONCO

Opis: Pump inlet filter

Producent: LABCONCO

Opis: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Producent: LABCONCO

Opis: Flexible duct connections reduce vibration between the blower and PVC ductwork.

Numer katalogowy: (LBCP110410021)

Producent: LABCONCO

Opis: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Producent: LABCONCO

Opis: Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Producent: LABCONCO

Opis: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Numer katalogowy: (LBCP3924200)

Producent: LABCONCO

Opis: Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Numer katalogowy: (LBCP3505300)

Producent: LABCONCO

Opis: Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

j.m.: 1 * 6 SZT

Wyprzedaż

Numer katalogowy: (LBCP3980422)

Producent: LABCONCO

Opis: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Telescoping base stands with fixed feet, nominal width of 76,2 mm, 914×737 mm, 43 kg, Do szlifów: —