Wyszukano: LABCONCO

Producent: LABCONCO

Opis: FreeZone® console freeze dryers with or without stoppering tray dryers are designed for lyophilising moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum and accommodation for a full size tray dryer such as the FreeZone® stoppering tray dryer pump (sold separately).

Producent: LABCONCO

Opis: Evaporator, centrifugal, PTFE-coated aluminium block for 110 tubes Ø 12 mm, max. height 150 mm

Producent: LABCONCO

Opis: Rękawice do podajników, Neopren, Czarny, Grubość: 0,015 gauge, Rozmiar rękawicy: 8,5

Numer katalogowy: (135-1096)

Producent: LABCONCO

Opis: This HEPA-filtered glove box has inlet and outlet HEPA filters and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (LBCP7949030)

Producent: LABCONCO

Opis: FreeZone® benchtop shell freezers provide a compact system for prefreezing samples for lyophilization.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation.

Numer katalogowy: (LBCP8019000)

Producent: LABCONCO

Opis: Tranporting cart made of stainless steel with two removable polished type 304 stainless steel pans that are 51 mm deep on three sides with one open side for easy equipment transfer from countertop to cart holds a variety of laboratory supplies, equipment and miscellaneous containers.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Filter pack, includes twin cartridges

Producent: LABCONCO

Opis: Epoxy-coated steel blower transition adapters fit all Labconco coated steel blowers.

Producent: LABCONCO

Opis: Clean benches provide product protection from environmental contaminants for applications requiring a particulate-free work area, including plant tissue culture, electronic part inspection, syringe filling, medical device assembly, media plate preparation, and PCR.

Numer katalogowy: (LBCP4882806)

Producent: LABCONCO

Opis: Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, Do szlifów: Laboratory Hoods, Fiberglass 30

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Producent: LABCONCO

Opis: SpillStopper™ work surface, right rear cupsink cutout, 1219×762×32 mm, 50 kg, Do szlifów: Laboratory Hoods, Protector®

Producent: LABCONCO

Opis: Storage cabinet accessory, Protector®, Interior shelf kit, 61 mm Protector® acid storage cabinets

Numer katalogowy: (LBCP9000732)

Producent: LABCONCO

Opis: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Accessory for Freeze Dryer, Heated shelf with sensor, for bulk tray dryers, 323×432×25 mm (suitable for operating at 230 V, 50/60 Hz)