Wyszukano: IKA JANKE KUNKEL

Numer katalogowy: (IKAA1905700)

Producent: IKA

Opis: Szkło borokrzemowe. 3.3.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: IKA

Opis: <B>LVS 105T 10-ef</B>: Compact, dry running, chemical resistant pump systems, used for many applications in chemical laboratories and research.

Producent: IKA

Opis: Shaker, Shaking Incubator

Numer katalogowy: (IKAA25002985)

Producent: IKA

Opis: Low profile laboratory shaker with digital display which has a large mounting surface. Continuous operation is guaranteed even under extreme loads. Ideal for larger vessels of 250 ml and over, e.g. round bottomed flasks, Erlenmeyer flasks, culture flasks and bottles. Variety of different vessels can be accommodated by choosing from the range of optional holding attachments (not included with shaker).

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: IKA

Opis: Dispersing element, D 60, Stojan/Wirnik Ø: -/60 mm, Objętość: 2 - 30 l

Producent: IKA

Opis: Unstirred water bath, IB R 20 eco (bath only), PC, Pojemność: 20 L, Zakres temperatury: ≤100 °C, Łaźnia Szer.×Głęb.×Wys.: 504×317×151 mm, Szer.xGłęb.xWys.: 552×365×167 mm

Numer katalogowy: (458-0052)

Producent: IKA

Opis: AOD 1 is used for oxidative decomposition of organic samples under pressure in a closed system.

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (IKAA20102007)

Producent: IKA

Opis: The CBC VISC lite heating and cooling bath circulator covers a wide temperature range from −25 to +125 °C and is designed to be combined with the IKA ROTAVISC viscometers.

j.m.: 1 * 1 SZT

New Product Wyprzedaż

Producent: IKA

Opis: Rotational viscometer

Numer katalogowy: (441-0469)

Producent: IKA

Opis: This overhead stirrer is ideal for special applications. Combining high performance with excellence, the units require minimum space.

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (IKAA20016334)

Producent: IKA

Opis: Compact and ergonomic heating safety bath for all tempering media.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: IKA

Opis: Hose nozzle K / M DN 25 for continuous operation of LABOR-PILOT

Producent: IKA

Opis: Small bridge, Do: medium and large IC basic bath

Producent: IKA

Opis: Shaker, Rocking/Rotating Shaker

Producent: IKA

Opis: Stainless steel PT100 temperature sensor, coated with SafeCoat, (Ø×H) 3×230 mm length, Do: RET control-visc

Producent: IKA

Opis: The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.