Wyszukano: CAMAG

Producent: CAMAG

Opis: Twin-trough chambers offer several ways to improve the results of TLC/HPTLC developing techniques.

Producent: CAMAG

Opis: Spray head for 552-0031

Producent: CAMAG

Opis: Glass lid for 200×200 mm and 200×100 mm twin trough and flat bottom chambers, Do szlifów: 200×200 mm, 200×100 mm

Producent: CAMAG

Opis: UV lamp, Tube light, long wave UV, 8 W, 366 nm

Producent: CAMAG

Opis: Ideal instrument for exact cutting of TLC/HPTLC plates that are frequently used in method development and pre-testing. The smartCut can cut glass plates up to 3 mm in thickness without damaging the sensitive layer.

Numer katalogowy: (552-0031)

Producent: CAMAG

Opis: Glass atomiser. Cost efficient alternative for a TLC sprayer.

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (552-0079)

Producent: CAMAG

Opis: Saturation pads

j.m.: 1 * 100 SZT

Wyprzedaż

Producent: CAMAG

Opis: These UV lamps with plastic housing are designed for TLC applications.

Certyfikaty

Producent: CAMAG

Opis: Disposable glass capillaries for manual sample application of 0,5, 1, 2, 5 or 10 µl. They can be handheld and positioned with the Multipurpose Spotting Guide (551-4230). They can also be used with Universal Capillary Holder (552-0044). Graduated 5 µl glass micropipettes are suitable for qualitative analysis on conventional TLC layers.

Producent: CAMAG

Opis: These flat bottom chamber allow the chromatogram to be developed in a tank atmosphere of partial or complete saturation with solvent vapours. The degree of layer pre-saturation cannot be controlled unless additional accessories are used.

Numer katalogowy: (552-0007)

Producent: CAMAG

Opis: The Nanomat 4 is used for easy application of samples in the form of spots onto TLC and HPTLC layers. A notch system ensures that sample positioning meets the requirements for automatic scanning with a densitometer. Samples are dispensed in volumes of 0,5 to 5 µl with disposable capillaries loaded into the universal capillary holder (552-0044) using the capillary guide (552-0039).

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (551-4230)

Producent: CAMAG

Opis: For plates up to 200×200 mm.

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (CAMA034.1798)

Producent: CAMAG

Opis: TLC precoated sheets, silica gel 60.

j.m.: 1 * 25 SZT

Wyprzedaż

Numer katalogowy: (CAMA022.6530)

Producent: CAMAG

Opis: Reagents are atomised into a fine aerosol spray with particles in the range of 0,3 to 10 µm.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: CAMAG

Opis: This chromatogram immersion device is suitable for TLC and HPTLC plates up to 200×200 mm.

Producent: CAMAG

Opis: The TLC plate heater III is designed for heating TLC plates to a given temperature, while ensuring homogenous heating across the plate. TLC plate heater III has a CERAN® heating surface which is resistant to all common reagents and is easily cleaned. The 200×200 mm heating surface has a grid to facilitate correct positioning of the TLC plate.