Wyszukano: LABCONCO

Numer katalogowy: (LBCP6030001)

Producent: LABCONCO

Opis: Mineralisation Workstation, Kjeldahl Digestion, Aplikacja: Azot Kjeldahla, Micro Kjeldahl digester, six place, Dla probówek: 30 / 100 ml, Szereg stanowisk:: 1×6

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Purifier Vertical Clean Benches direct HEPA-filtered air downward over the work area to provide ISO Class 5 (formerly Class 100) conditions and protect your work from particulate contamination. Applications for clean benches include plant tissue culture, media plate preparation, electronics inspection, medical device assembly and pharmacy drug preparation.

Numer katalogowy: (LBCP8019000)

Producent: LABCONCO

Opis: Tranporting cart made of stainless steel with two removable polished type 304 stainless steel pans that are 51 mm deep on three sides with one open side for easy equipment transfer from countertop to cart holds a variety of laboratory supplies, equipment and miscellaneous containers.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Filter pack, includes twin cartridges

Producent: LABCONCO

Opis: Epoxy-coated steel blower transition adapters fit all Labconco coated steel blowers.

Producent: LABCONCO

Opis: Clean benches provide product protection from environmental contaminants for applications requiring a particulate-free work area, including plant tissue culture, electronic part inspection, syringe filling, medical device assembly, media plate preparation, and PCR.

Numer katalogowy: (LBCP4882806)

Producent: LABCONCO

Opis: Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, Do szlifów: Laboratory Hoods, Fiberglass 30

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Producent: LABCONCO

Opis: SpillStopper™ work surface, right rear cupsink cutout, 1219×762×32 mm, 50 kg, Do szlifów: Laboratory Hoods, Protector®

Producent: LABCONCO

Opis: Storage cabinet accessory, Protector®, Interior shelf kit, 61 mm Protector® acid storage cabinets

Numer katalogowy: (LBCP9000732)

Producent: LABCONCO

Opis: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Accessory for Freeze Dryer, Heated shelf with sensor, for bulk tray dryers, 323×432×25 mm (suitable for operating at 230 V, 50/60 Hz)

Producent: LABCONCO

Opis: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Producent: LABCONCO

Opis: Glassware washing machines, Cylinder insert graduated

Producent: LABCONCO

Opis: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Numer katalogowy: (LBCP303681150)

Producent: LABCONCO

Opis: Purifier Logic+ Class II, Type B2 biosafety cabinets provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

j.m.: 1 * 1 SZT

Wyprzedaż