Drukuj

chlorek sodu 99,0-100,5 Dry_basis, granular USP, FCC, J.T.Baker®

Dostawca: Avantor
Uwaga

Synonim: Saline, NaCl, Sea salt, Halite

3628-01EA 220 PLN
3628-01 3628-05 3628-06 3628-07 3628-20 3628-60 3628-65 3628-08 3628-68 3628-F7 3628-F9
chlorek sodu 99,0-100,5 Dry_basis, granular USP, FCC, J.T.Baker®
chlorek sodu

Certyfikaty: Must be subjected to further processing during the preparation of injectable dosage forms. Meets USP and FCC requirements. GMP manufactured product.


Uwaga: Preserve in tightly sealed containers.

Formuła: NaCl
MW: 58.44 g/mol
Temp. Wrzenia: 1413 °C (1013 hPa)
Temp. topnienia: 801 °C
Gęstość: 2.16 g/cm³
Temperatura przechowywania: Temperatura otoczenia
Numer MDL: MFCD00003477
Numer CAS: 7647-14-5
Numer WE (dawny EINECS): 231-598-3
Klasyfikacja Merck : 14,08599

Zobacz ceny

Wyniki testów specyfikacyjnych

Meets F.C.C. Requirements 99.0 - 100.5%
Meets U.S.P Requirements Passes Test
GMP Manufactured Product Passes Test
Food GMP Manufactured Product Passes Test
CAUTION: For Manufacturing, processing or repackaging ≤0.2 ppm
Bulk Food Chemical Passes Test
Bulk Pharmaceutical Chemical ≤1 ppm
USP - Assay (NaCl) (USP) (dried basis) 99.0 - 100.5 %
USP - Identification A Passes Test
USP - Identification B Passes Test
USP - Acidity or Alkalinity Passes Test
USP - Aluminum (Al) ≤0.2 ppm
USP - Appearance of Solution Passes Test
USP - Arsenic (As) ≤1 ppm
USP - Barium (Ba) Passes Test
USP - Nitrite (NO₂) (Absorbance Value) ≤0.01
USP - Magnesium and Alkaline Earth Metals (as Ca) ≤100 ppm
USP - Iodide (I) Passes Test
USP - Bromide (Br) ≤100 ppm
USP - Iron (Fe) ≤2 ppm
USP - Loss on Drying ≤0.5 %
USP - Phosphate (PO₄) ≤25 ppm
USP - Potassium (K) ≤500 ppm
USP - Ferrocyanide Passes Test
USP - Sulfate (SO₄) ≤200 ppm
FCC - Assay (as NaCl) (FCC) (ignited basis) 99.0 - 100.5 %
FCC - Identification A Passes Test
FCC - Identification B Passes Test
FCC - Arsenic (As) ≤1 ppm
FCC - Calcium and Magnesium (as Ca) (by EDTA titration)(FCC) ≤0.35 %
FCC - Heavy Metals (as Pb) ≤2 ppm
FCC - Iron (Fe) ≤2 ppm
FCC - Loss on Drying ≤0.5 %
Appearance (White crystals or granules) Passes Test
No Class 1,2,3 or other solvents are used or produced in the
manufacturing or purification of the product.
Must be subjected to further processing during the preparation of
injectable dosage forms
Elemental Impurities (USP 232, EP 5.20) - Information on elemental
impurities for this product is available on the associated Product
Regulatory Data Sheet and elemental impurity profile report.


Learn more

About VWR

Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...

Więcej About VWR