Wyszukano: Odczynniki+do+mikromacierzy

Producent: LABCONCO

Opis: Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulphur compounds, or ammonia chemical fumes and vapours, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Numer katalogowy: (LBCP3961622)

Producent: LABCONCO

Opis: XPert™ Bulk Powder Filtered System is designed to provide user protection from hazardous airborne particulates and fumes generated during powder transfer operations. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to maximize containment. The system includes a built-in blower, 99,99% efficient HEPA filter, true bag-in/bag-out filter disposal system, and pre-wired fluorescent light and switches for blower and light.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Numer katalogowy: (TEST0563.4200)

Producent: TESTO

Opis: This Testo 420 air capture hood is for larger ceiling outlets and at the same time enjoy multiple maintenance benefits on HVAC systems. Because the capture hood with the removable measuring instrument is not only exceptionally light, it also guarantees accurate air capture calculations at swirl outlets.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: asecos

Opis: Safety workstation is a robust construction made of chemically resistant, anodised aluminium profiles used to protect from harmful substances and vapours in the open containers.

Producent: KOETTERMANN

Opis: The pharmacy hood is a small hood, which was developed especially for the handling of hazardous substances in pharmacies. It complies with the requirements of section 4 (2) of the German Pharmacies Act and is ideally suited for handling dusty compounds or volatile chemicals. These hoods have been designed for safe handling of chemicals, mineral acids, concentrated and heated acids.

Producent: LABCONCO

Opis: Access opening cover, stainless steel 304, 605 mm OD

Producent: BIGNEAT

Opis: Akcesoria do bezkanałowego wyciągu Chemcap clearview

New Product

Numer katalogowy: (LBCP3780401)

Producent: LABCONCO

Opis: For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Producent: LABCONCO

Opis: Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Producent: LABCONCO

Opis: Explosion-proof light fixture kit for mounting on fiberglass, includes explosion-proof incandescent light fixture, mounting hardware, 330×177 mm

Producent: LABCONCO

Opis: Solid epoxy work surface, flat, no cupsink cutout for 4 inch width hood, enclosures, glove boxes, 1220×760×30 mm, 61 kg

Numer katalogowy: (LBCP4882806)

Producent: LABCONCO

Opis: Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg, Do szlifów: Laboratory Hoods, Fiberglass 30

j.m.: 1 * 1 SZT

Wyprzedaż

Numer katalogowy: (BELAF500201010)

Producent: Bel-Art Products, a Part of SP

Opis: Scienceware® Clear View fume hoods are suitable for potentially hazardous fumes and dust. It is constructed of polycarbonate with sleek modern style.

j.m.: 1 * 1 SZT

Wyprzedaż

Producent: LABCONCO

Opis: These fume adsorbers are for light duty histology cover slipping and staining areas. Activated carbon media adsorb organic odours and noxious vapors released by solvents like xylene and toluene while clean air is recirculated into the laboratory. These enclosures are low profile, completely portable and require no ductwork. They easily accommodate shallow countertops or those with overhanging cabinets.