Drukuj

Wyszukano: Filtry do fazy ruchomej

Liquid process filters are used to separate particles and fluid in a suspension. When selecting a filter, it is important to select the proper filter type to ensure the filter meets the needs and requirements of the system. Filters can come in three basic varieties, namely cartridge filters, clean-in-place filters, and bag filters. Large surface areas in some models prevent pump cavitation, while stainless steel and polymer versions offer chemical compatibility.

Liquid process filters are used to separate particles and fluid in a suspension. When selecting a filter, it is important to select the proper filter type to ensure the filter meets the needs and requirements of the system. Filters can come in three basic varieties, namely cartridge filters, clean-in-place filters, and bag filters. Large surface areas in some models prevent pump cavitation, while stainless steel and polymer versions offer chemical compatibility.


23  wyniki/ów wyszukiwania

SearchResultCount:"23"

Sort Results

Widok listy Widok uproszczony (nowość)

Oceń wyniki wyszukiwania

Producent: Avantor
Opis: These filters are made from 100% PEEK.

Producent: Avantor
Opis: These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Nowy przejrzysty widok dla europejskich klientów

Czy wiesz, że wprowadziliśmy nową, ulepszoną widoczność lokalizacji zapasów przy realizacji zamówienia?

Dowiedz się więcej

Udoskonalenia w zakresie lokalizacji zapasów magazynowych

Numer katalogowy: (590-0201)
Producent: Bohlender
Opis: Filter candle made of porous PE.
j.m.: 1 * 10 SZT


Producent: Avantor
Opis: The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.

Numer katalogowy: (ROBU80052)
Producent: ROBU GLASFILTER
Opis: This solvent filter is made of pure borosilicate glass.
j.m.: 1 * 1 SZT


Producent: Bohlender
Opis: These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.

Numer katalogowy: (590-0221)
Producent: Bohlender
Opis: Suction Filter with PTFE membrane.
j.m.: 1 * 5 SZT


Producent: ROBU GLASFILTER
Opis: These filters are suitable for degassing and filtration of solvents e.g. in chromatography.

Producent: IDEX RHEODYNE
Opis: Inlet filters are used to extract particles from the sample between the injector and the column.

Numer katalogowy: (VIVAH2O-CUF)
Producent: Sartorius
Opis: The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.
j.m.: 1 * 1 SZT


Numer katalogowy: (MICS58846-05)
Producent: MICROSOLV
Opis: Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.
j.m.: 1 * 1 SZT


Producent: PerkinElmer
Opis: Solvent reservoir sparger, Stal nierdzewna, Rozmiar porów: 40 µm

Numer katalogowy: (VARIAL9402)
Producent: VARIAN
Opis: This mobile phase inlet filter operates up to 500 °C and is compatible with halogenated solvents.
j.m.: 1 * 1 SZT


Producent: VICI JOUR RESEARCH
Opis: The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Producent: Agilent
Opis: It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.

Producent: Merck
Opis: Inlet filter assembly, PE filter, Rozmiar porów: 10 μm

Cena wymaga potwierdzenia u dostawcy
Zapasy tego artykułu są ograniczone, ale możliwe, że jest on dostępny w pobliskim magazynie. Upewnij się, że jesteś zalogowany na stronie, aby móc sprawdzić dostępność zapasów. Jeśli call ciągle się wyświetla i potrzebujesz pomocy, zadzwoń na 58 323 82 00.
Zapasy tego artykułu są ograniczone, ale możliwe, że jest on dostępny w pobliskim magazynie. Upewnij się, że jesteś zalogowany na stronie, aby móc sprawdzić dostępność zapasów. Jeśli call ciągle się wyświetla i potrzebujesz pomocy, zadzwoń na 58 323 82 00.
Ten produkt jest ograniczony w dostępie i można go zamówić tylko przy użyciu zaaprobowanego konta. Jeśli potrzebujesz pomocy, napisz do Działu Prawnego VWR na tomasz.chrobak@pl.vwr.com
Do zakupu tego produktu może być potrzebna dodatkowa dokumentacja. Przedstawiciel VWR skontaktuje się z Tobą w razie potrzeby.
Ten produkt jest zablokowany na stronie internetowej. W celu zamówienia, skontaktuj się z Działem Obsługi Klienta.
Produkt oryginalny został wycofany. Dostępny jest wskazny zamiennik .
Wybrany produkt został wycofany - sprzedaż do wyczerpania zapasów. Dostępne zamienniki można znaleźć poprzez wpisanie powyższego numeru katalogowego VWR w okno wyszukiwarki. Jeśli potrzebujesz dalszej pomocy, prosimy o kontakt z Działem Doradztwa Produktowego pod numerem telefonu 58 3238 220.
1 - 16 of 23
no targeter for Bottom